Now there are turbos in a lot of new cars, whether it's the engines essences ou Diesel. Just before starting this task, of course, you have to be convinced that the problem arises from the turbo in the famous Toyota Hi Ace 3. But given that you are on this page, you certainly know the source.
How to change the turbo of your Toyota Hi Ace 3
Depending on the turbo to install, some of the processes may change very slightly. As soon as you buy a turbo it will always be supplied with assembly instructions. The ideal is then to follow it point by point. However, in the event that you still have not purchased the product, here are the steps to follow in order to replace a turbo on a Toyota Hi Ace 3. So you will know what capacities are needed. Just before starting, make sure you have all the tools required. You will have the use of your receptacle for the oil, a bunch of ratchets, a pair of pliers, allen and flat wrenches. As a rule, turbos will be sold with their mounting kit which includes some jointsFew studs but also a portion oil. However, we advise you to go see a specialist since working from a pit is even easier to do the manipulations. And of course, the turbo remains a very delicate element on this Toyota Hi Ace 3. Even if handling is not super difficult, it is still advisable to go to a specialist.
- Change the engine oil and then replace this oil filter. Replace a sprig of oil, without putting too much. This is an imperative procedure!
- Remove all the plugs present around the turbo of your Toyota Hi Ace 3.
- Check that there are no undesirable elements inside the housings, as this can be a cause of concern.
- Remove the pipes but also all the screws but also the nuts which will hold this turbo.
- Remove the existing turbo from your Toyota Hi Ace 3.
- Fit the brand new turbo, checking that the gaskets match completely
- Replace the oil return pipe
- Mount the screws and nuts you removed
- Fill the turbo with the oil supplied with the turbo
- Operate the turbine by hand to activate the turbo.
- Reconnect all the components to the turbo of this Toyota Hi Ace 3.
- Now that when the parts happen to be in place, you need to start the engine and let it run for about ten minutes.
Now that the assembly is installed and the car has been running for at least 5 minutes, you must drive your Toyota Hi Ace 3 to check that the assembly turns properly. We advise you at the same time to watch the quantity of oil but also of water quite frequently for 15 days. Post a comment if ever our text was useful to you. See you soon !