Today we find these turbos in a lot of new cars, whether in systems essences ou Diesel. Before embarking on the DIY you will obviously have to be sure that the problem is with the turbo in your Toyota Highlander 2. However, since you are reading this article, it means that you probably know the source.
How to change the turbo of your Toyota Highlander 2
Depending on the turbo to set up, procedures may vary very slightly. As soon as you buy a turbo, it is always supplied with instructions. The best thing to do is read it like this. Having said that, if you have not yet made the purchase, here are the main axes so as to change a turbo in this Toyota Highlander 2. This way you will understand if you have the required skills. Before starting, make sure you have all the tools required. You are going to need a container for the engine oil, a set of ratchets, your flat pliers, allen wrenches as well as spanners. Usually, the turbos turn out to be supplied with their set of utensils which contain joints, studs but also a syringe oil. We still advise you to go to a pro since working with a pit remains much more convenient for this type of process. In addition, the turbo is a super sensitive element on a Toyota Highlander 2. Even though the operation is not super laborious, it is still advisable to go to a mechanic.
- Change the engine oil then change this oil filter. Put a bit of oil, in small quantity. This is an essential step!
- Remove all the plugs found around the turbo of your Toyota Highlander 2.
- Check that no foreign bodies are found on the casings, since this is sometimes a source of problem.
- Remove the conduits as well as all the screws but also the nuts which make it possible to hold this turbo.
- Remove the turbo in place in this Toyota Highlander 2.
- Refit the all-new turbo, checking that the locations are completely suitable
- Replace the oil return pipe
- Install all required screws and nuts
- Fill the turbo with the supplied oil
- Operate the turbine by hand to activate the turbo.
- Reconnect all the components to the Toyota Highlander 2 turbo.
- Now that when all of the parts are in place, you can start the engine and let it run for about ten minutes.
Once everything is in place and the engine has been running for a while, you need to get behind the wheel of this Toyota Highlander 2 to check that the assembly is running smoothly. We also advise you to check the quantity of oil but also of water quite often for 15 days. Post a comment if our tutorial was helpful. Good walk !