Nowadays there are turbos on a lot of cars in circulation, whether in systems essences ou Diesel. Just before starting this task it is of course necessary to be sure that the problem is with the turbo of the famous Toyota Hilux 3. However, since you have come this far, it means that you most likely know the source. .
How to change the turbo of your Toyota Hilux 3
Depending on the turbo to install, methods will be able to fluctuate very slightly. When you buy a turbocharger, the product will always be supplied with an operating manual. The best is therefore to follow it point by point. But if you have not yet purchased the product, we suggest the steps to follow in order to change a turbo in your Toyota Hilux 3. Therefore you will understand if you are able or not. Just before starting, make sure you have all of the tools indispensable. You will need a container for engine oil, a set of ratchets, your flat pliers, allen and flat wrenches. Most of the time, turbochargers will be supplied with their assembly kit including a few jointsFew studs but also a portion oil. We still suggest that you go see a mechanic since working from a pit is much more practical for doing this kind of process. In addition, the turbocharger turns out to be a super fragile component in this Toyota Hilux 3. Taking into account that the technique is not very complex, it is still advisable to go to a mechanic.
- Drain the engine block and change the oil filter. Add a little oil, in a small quantity. It is essential manipulation!
- Remove all the plugs found on the turbocharger of this Toyota Hilux 3.
- Watch that there are no desirable non-elements in the casings, since this is sometimes a source of problem.
- Remove the ducts and all the screws as well as the nuts which hold the turbocharger.
- Place the turbocharger in place in your Toyota Hilux 3.
- Reassemble the new turbocharger, checking that the seals stick precisely
- Install the oil return pipe
- Replace each of the necessary screws and nuts
- Fill the turbocharger using the oil supplied
- Start the turbine by hand so as to activate the turbocharger.
- Reattach all the connections to the turbocharger of this Toyota Hilux 3.
- Once each of the parts are in place, you will be able to start the engine block and let it run for ten minutes.
Now that the turbo is in place and of course the car has been running for at least 5 minutes, you can get around behind the wheel of your Toyota Hilux 3 to check that everything is working well. At the same time, we advise you to check the oil and water level quite often in the following weeks. Post a comment if this tutorial was useful to you. See you soon !