Now we can find these turbos in most vehicles of the last 20 years, whether in systems essences ou Diesel. Before starting the work, of course, you must be sure that the problem comes from the turbo in your Toyota Hilux 4. However, if you are reading us, it reveals that you probably know the source.change-turbo-Toyota-Hilux-4

How to change the turbo of your Toyota Hilux 4

Compared to the turbo to set up, handling will be able to fluctuate slightly. As soon as you purchase a turbo the product will usually be sold with an assembly note. The best thing to do is therefore to read it. However, if you have not yet made the purchase, here are the main points to replace a turbo for a Toyota Hilux 4. In fact you will understand if you are able or not. Before starting, be careful to have all the tools required. You will have the use of a receptacle for the oil, a bunch of ratchets, a pair of pliers, your allen wrenches as well as flats. Often these turbos are supplied with their mounting kit which contains joints, studs but also a dose oil. However, we advise you to have a specialist check it since tinkering with a pit is much more convenient for this type of process. In addition, the turbo remains an extremely fragile component in this Toyota Hilux 4. Even if the technique is not really complicated, we nevertheless advise you to go to a specialist.

  • Drain the engine block and replace your oil filter. Add a sprig of oil, without putting too much. It is an imperative procedure!
  • Remove all the plugs present on the turbo of the Toyota Hilux 4.
  • Check that there is no residue in the housings, as this is undoubtedly a source of concern.
  • Remove the ducts and of course each of the screws and nuts that support your turbo.
  • Remove the turbo in place in the Toyota Hilux 4.
  • Set up the all-new turbo, checking that the locations match exactly
  • Replace the oil return pipe
  • Reinstall all the required screws and nuts
  • Fill the turbo with the oil supplied with the turbo
  • Rotate the turbine with your hands to operate the turbo.
  • Assemble all the connections to the Toyota Hilux 4 turbo.
  • Once all the parts are installed, you must start the engine block and let it run for about ten minutes.

Once everything is in order, but also after the car has been running for a few minutes, it is possible to drive the Toyota Hilux 4 in order to check that everything is running smoothly. It is also advisable to check the quantity of oil but also of water quite often in the days to come. Post a comment if this guide has helped you. Good road !