Nowadays you can find turbos on many vehicles of the last 20 years, whether for systems essences ou Diesel. Before starting work, you will of course have to be sure that there is a fault with the turbo in your Toyota Land Cruiser Serie 120. However, if you have made it this far, it means that you probably know the reason.change-turbo-Toyota-Land-Cruiser-Serie-120

How to change the turbo of your Toyota Land Cruiser Serie 120

Depending on the turbo to be presented, processes will be able to vary a bit. As soon as you get a turbo it will be systematically delivered along with a performance note. The ideal is therefore to follow it point by point. However, in the event that you still have not purchased the product, find out the outline of how to replace a turbo for your Toyota Land Cruiser Serie 120. Subsequently you will find out if you have the skills. Before starting, you must have all the necessary tools required. You will have the utility of your receptacle for the engine oil, a set of ratchets, a flat pliers, allen wrenches as well as flat. Often, turbochargers will be found to be supplied with an assembly kit that includes a few jointsFew studs as well as a dose oil. Despite everything, we suggest that you go see a pro because tinkering with a pit is much easier to carry out these processes. In addition, the turbo is a particularly fragile component on the Toyota Land Cruiser Serie 120. You should know that handling is not really laborious, we still advise you to go to a specialist.

  • Drain the engine then replace your oil filter. Put a sprig of oil, in a small quantity. It is an inevitable procedure!
  • Remove all the plugs around the turbo of the Toyota Land Cruiser Serie 120.
  • Check that there are no residues within the housings, since this is undoubtedly the source of the problem.
  • Remove the conduits but also each of the screws as well as the nuts which will support your turbo.
  • Remove the existing turbo from your Toyota Land Cruiser Serie 120.
  • Fit the new turbo, checking that the gaskets match perfectly
  • Fit the oil return pipe
  • Fit all necessary screws and nuts
  • Fill the turbo using oil from your syringe
  • Operate the turbine with your hands to turn the turbo.
  • Reconnect all components to the turbo of this Toyota Land Cruiser Serie 120.
  • Once all the parts are in place, you will be able to start the engine and run it for 5-10 minutes.

Now that the assembly is installed and the engine has been running for about ten minutes, you can drive your Toyota Land Cruiser Serie 120 to check that everything is working well. At the same time, we recommend that you check the oil and water level quite frequently in the days to come. Leave a comment if our file has been useful. See you soon !