Now we find these turbos in a lot of new cars, whether it's systems essences ou Diesel. Just before starting this task you will of course need to be sure that the problem is with the turbo in your Toyota Land Cruiser Serie 150. However, seeing that you have come this far, it shows that you probably know the source.change-turbo-Toyota-Land-Cruiser-Serie-150

How to change the turbo of your Toyota Land Cruiser Serie 150

Compared to the turbo to be presented, some of the processes may change a bit. When you get a turbo, it will always be sold with an instruction manual. The ideal is then to follow it point by point. However, in the event that you still have not made the purchase, here are the steps to follow in order to change a turbo on the Toyota Land Cruiser Serie 150. This way you will know what capacities are required. Just before starting, make sure you have all the tools required. You will need a bucket for oil, a set of ratchets, your flat pliers, allen and flat wrenches. Usually these turbos turn out to be sold with a mounting kit including joints, studs but also a little oil. We still advise you to have a pro checked since working with a pit remains much more practical for this type of process. What's more, the turbo happens to be a rather fragile component in a Toyota Land Cruiser Serie 150. Taking into account that handling is not really complex, it is still advisable to go to a mechanic.

  • Drain the engine block and change your oil filter. Replace a little oil, without putting too much. It is an inevitable procedure!
  • Remove all of the plugs around the turbo of your Toyota Land Cruiser Serie 150.
  • Check that there are no residues in the crankcases, because that is a source of concern.
  • Remove the ducts and of course each of the screws but also the nuts which hold your turbo.
  • Remove the faulty turbo from this Toyota Land Cruiser Serie 150.
  • Install the famous turbo by checking that the locations agree precisely
  • Install the oil return pipe
  • Fit all the required screws and nuts
  • Fill the turbo with oil from your syringe
  • Operate the turbine by hand to operate the turbo.
  • Connect all the components to the turbo of this Toyota Land Cruiser Serie 150.
  • As soon as all the parts turn out to be assembled, you will be able to start the engine block and run it for 5 to 10 minutes.

Now that everything is set up and screwed in and of course the car has been running for at least 5 minutes, you can drive this Toyota Land Cruiser Serie 150 so that you can check that everything is running correctly. We advise you at the same time to watch the quantity of oil but also of water quite frequently in the following weeks. Post a comment if this file has helped you. Good walk !