Nowadays we find the turbos in most vehicles on the market, whether in systems essences ou Diesel. Before starting these manipulations it is of course necessary to be convinced that the problem comes from the turbo of this Toyota Land Cruiser Sw Serie 200. But if you are on this page, this means that you most likely know the reason.change-turbo-Toyota-Land-Cruiser-Sw-Serie-200

How to change the turbo of your Toyota Land Cruiser Sw Serie 200

Compared to the turbo, some of the procedures may change a bit. As soon as you buy a turbo, the product is always supplied with an instruction manual. The ideal is therefore to follow it point by point. That said, in the event that you have not yet purchased the product, we offer the main axes to replace a turbo on this Toyota Land Cruiser Sw Serie 200. In fact you will understand if you are able or not. Just before you start, make sure you have all the tools required. You are going to need your bucket for oil, a bunch of ratchet wrenches, your flat pliers, your allen and flat wrenches. Usually the turbos are supplied with their tool kit which contains some jointsFew studs and a little oil. However, we recommend that you go to a garage simply because working with a pit turns out to be much easier for this kind of process. Furthermore, the turbo is a fairly sensitive constituent in a Toyota Land Cruiser Sw Serie 200. You should know that the technique is not very complex, it is still recommended to go to a technician.

  • Drain the engine block then replace this oil filter. Replace a bit of oil, but very little. It is a necessary manipulation!
  • Remove all the plugs around the turbo of the famous Toyota Land Cruiser Sw Serie 200.
  • Check that there are no foreign bodies in the housings, since this can be a cause of problem.
  • Remove the conduits and each of the screws and then the nuts that will hold this turbo.
  • Remove the faulty turbo from the Toyota Land Cruiser Sw Serie 200.
  • Refit the all-new turbo, checking that the locations stick precisely
  • Replace the oil return pipe
  • Replace all the required screws and nuts
  • Fill the turbo with oil from your syringe
  • Manually rotate the turbine to activate the turbo.
  • Refit all of the components to the turbo of your Toyota Land Cruiser Sw Serie 200.
  • Now that when all the components have been assembled, you must start the engine block and run it for 5 to 10 minutes.

Now that everything is in order and the car has been running for a while, you will be able to take a ride in the Toyota Land Cruiser Sw Serie 200 to see that everything is working well. We also recommend that you check the oil and water level fairly frequently in the weeks that follow. Leave a comment in case this tutorial served you. Enjoy again!