Nowadays there are turbos on a lot of cars in circulation, whether in systems essences ou Diesel. Before you start these operations, you will obviously have to be sure that the malfunction comes from the turbo of your Toyota Land Cruiser Sw Serie 50. But if you are on this page, this shows that you probably know the cause.change-turbo-Toyota-Land-Cruiser-Sw-Serie-50

How to change the turbo of your Toyota Land Cruiser Sw Serie 50

Depending on the turbo to be installed, processes may fluctuate slightly. When you get a turbo it will usually be provided with a note of achievement. So the best thing is that you read it. On the other hand in the case where you have not yet made the purchase, discover the main axes to be able to replace a turbo for your Toyota Land Cruiser Sw Serie 50. In fact you will know if you have the skills. Before you start, make sure you have all of the tools required. You will use your bucket for oil, a set of ratchet wrenches, flat pliers, allen wrenches as well as flat. Often, turbos are sold with their tool kit including joints, studs as well as a little oil. We still suggest you go to a specialist since tinkering with a pit turns out to be easier to perform this kind of manipulation. In addition, the turbo happens to be a particularly sensitive component on a Toyota Land Cruiser Sw Serie 50. You should know that the handling is not very difficult, we still advise you to go to a garage.

  • Drain the engine then replace the oil filter. Add a little oil, but not too much. It is an essential manipulation!
  • Remove all the plugs there are on the turbo of this Toyota Land Cruiser Sw Serie 50.
  • Check that there are no undesirable elements inside the casings, because this is sometimes a cause for concern.
  • Remove the ducts with all the screws but also the nuts which allow the turbo to be supported.
  • Remove the faulty turbo from the Toyota Land Cruiser Sw Serie 50.
  • Refit the new turbo, checking that the seals stick completely
  • Fit the oil return pipe
  • Install all required screws and nuts
  • Fill the turbo using the oil supplied with the turbo
  • Rotate the turbine with your hands to rotate the turbo.
  • Connect all the components to the turbo of your Toyota Land Cruiser Sw Serie 50.
  • Now that when all the parts are in place, you can start the engine and let it run for a few minutes.

Once the turbo is in place and of course the car has been running for a few minutes, do not hesitate to drive with the Toyota Land Cruiser Sw Serie 50 in order to check that everything is working well. We also advise you to check the oil level but also the water level quite often in the weeks that follow. Post a comment if our tutorial served you. Good walk !