Today we find the turbos on a lot of vehicles on the market, whether it's systems essences ou Diesel. Before starting this task you will of course have to be convinced that the problem lies with the turbo in this Toyota Mr 2. However, since you are reading this article, you most likely know the reason.change-turbo-Toyota-Mr-2

How to change the turbo of your Toyota Mr 2

Depending on the turbo to be presented, some of the methods may change very slightly. When you get a turbocharger it will usually be sold with an assembly instructions. The best thing to do is while you read it. On the other hand, in the event that you still have not made the purchase, we offer you the outline for changing a turbo compressor on your Toyota Mr 2. In fact you will understand if you have the required skills. Before starting, you must have all of the tools required. You will need a container for the oil, a set of ratchets, flat pliers, allen and flat wrenches. Usually these turbos are supplied with a mounting kit which includes some jointsFew studs but also a portion oil. We nevertheless suggest that you go to a professional since tinkering from a pit is much easier to carry out these processes. In addition, the turbocharger is a really sensitive element for this Toyota Mr 2. You should know that the technique is not very complicated, we advise you all the same to go to a technician.

  • Drain the engine and change the oil filter. Put a bit of oil, but not too much. This is a necessary manipulation!
  • Remove all the plugs that there are around the turbocharger of this Toyota Mr 2.
  • Examine that no undesirable elements are found in the housings, since this is undoubtedly a source of malfunction.
  • Remove the ducts and all the screws and then the nuts which will hold the turbocharger.
  • Remove the turbocharger in place in your Toyota Mr 2.
  • Fit the brand new turbocharger, checking that the locations match perfectly
  • Replace the oil return pipe
  • Refit all the necessary screws and nuts
  • Fill the turbocharger with oil from your syringe
  • Start the turbine with your hands so that the turbocharger operates.
  • Connect all the components to the turbocharger of the Toyota Mr 2.
  • Now that when all the components are installed, you can start the engine and let it run for a few minutes.

Now that the assembly is installed but also that the car has been running for 5 to 10 minutes, you must walk around with your Toyota Mr 2 to check that everything is working properly. We also advise you to check the quantity of oil and water quite frequently for 15 days. Post a comment if this guide was helpful. Enjoy again!