Now we find the turbos in most new automobiles, whether for engines essences ou Diesel. Before starting these manipulations we will of course have to be certain that the hassle comes from the turbo of this Toyota Mr 3. However, given that you have arrived here, it is because you probably know the source.change-turbo-Toyota-Mr-3

How to change the turbo of your Toyota Mr 3

Compared to the turbo, some of the methods will be able to fluctuate slightly. When you buy a turbocharger, the latter is always supplied with a performance note. The best thing to do is therefore to read it. But in the event that you have not purchased the product, we offer you the main axes to replace a turbo compressor in your Toyota Mr 3. So you will understand if you have the skills. Before getting started, make sure you have all of the tools indispensable. You are going to have the use of an oil receptacle, a set of ratchet wrenches, your pliers, allen and flat wrenches. Typically, turbochargers are found to be supplied with a batch of utensils which includes joints, studs and a dose oil. We still recommend that you have a pro check because working with a pit is more convenient for doing this kind of work. And of course, the turbocharger is a rather fragile constituent in the Toyota Mr 3. Even if the technique is not extremely complicated, we nevertheless advise you to go to a garage.

  • Change the engine oil then replace this oil filter. Add a little oil, but very little. This is an essential manipulation!
  • Remove the various plugs found on the turbocharger of the Toyota Mr 3.
  • Check that there are no residues inside the casings, since this is undoubtedly a source of malfunction.
  • Remove the conduits and of course all the screws and nuts which hold this turbocharger.
  • Remove the existing turbocharger from your Toyota Mr 3.
  • Reassemble the new turbocharger, checking that the locations fully match
  • Refit the oil return pipe
  • Install all of the screws and nuts you removed
  • Fill the turbocharger using the oil supplied with the turbo
  • Operate the turbine by hand to operate the turbocharger.
  • Reconnect the various elements to the turbocharger of the Toyota Mr 3.
  • As soon as all the parts have been fitted, you can start the engine and let it run for ten minutes.

Now that the assembly is installed and of course the engine has been running for at least 5 minutes, you can drive in your Toyota Mr 3 so as to check that the assembly works well. We also advise you to look at the oil and water level fairly frequently for 15 days. Write a comment if our text helped you. Good road !