Nowadays we find the turbos in most new automobiles, whether it's systems essences ou Diesel. Just before starting work, we will obviously have to be certain that the problem came from the turbo of the famous Toyota M. However, since you are on this page, this means that you certainly know the reason.
How to change the turbo of your Toyota Mr
Compared to the turbo to be implemented, procedures will be able to change a bit. When you buy a turbocharger, it is systematically sold with an assembly note. So the best thing to do is to follow it to the letter. However in case you have not made the purchase, here are the steps to follow in order to replace a turbo for a Toyota M. This way you will understand if you are able or not. Just before you start, you must have all of the tools indispensable. You will need a container for engine oil, a set of ratchet wrenches, flat pliers, allen and flat wrenches. Usually, the turbochargers will be supplied with a batch of utensils which contains some jointsFew studs but also a little oil. It is nevertheless advisable to go to a specialist since working from a pit turns out to be even easier to carry out the work. In addition, the turbocharger is a really delicate component for a Toyota M. Even if the operation is not really laborious, we still advise you to go to a technician.
- Drain the engine block then replace this oil filter. Replace a little oil, but very little. This is an inevitable manipulation!
- Remove all the plugs found around the turbocharger of the famous Toyota Mr.
- Check that there are no undesirable elements in the casings, as this is sometimes a cause of malfunction.
- Remove the conduits but also all of the screws but also the nuts that will help maintain this turbocharger.
- Remove the existing turbocharger from the Toyota Mr.
- Install the new turbocharger, checking that the seals fully match
- Fit the oil return pipe
- Fit each of the required screws and nuts
- Fill the turbocharger with oil from your syringe
- Operate the turbine with your hands to operate the turbocharger.
- Connect all the elements to the turbocharger of the Toyota M.
- As soon as each of the components turn out to be in place, you will start the engine block and let it run for ten minutes.
Now that everything is installed and screwed and the engine has been running for at least 5 minutes, do not hesitate to take a ride in the Toyota Mr to check that the assembly is working properly. We also advise you to watch the oil level but also the water level quite often in the coming days. Write a comment in case this tutorial served you. See you soon !