Now we find turbos on many new cars, whether for engines essences ou Diesel. Just before starting the DIY it is of course necessary to be convinced that the concern comes from the turbo of this Toyota Paseo. However, since you are reading this article, it reveals that you most likely know the cause.change-turbo-Toyota-Paseo

How to change the turbo of your Toyota Paseo

Depending on the turbo to be presented, some of the methods will be able to change very slightly. As soon as you get a turbo the product will generally be delivered with an assembly manual. The ideal is therefore that you follow it to the letter. However in case you still haven't made the purchase, here are the main points to change a turbo compressor on a Toyota Paseo. Thereafter you will know if you are able or not. Just before you start, make sure you have all of the tools indispensable. You will use your oil receptacle, a bunch of ratchet wrenches, your pliers, allen and flat wrenches. Usually, these turbos will be supplied with their mounting kit including some jointsFew studs as well as a portion oil. However, we suggest that you have it checked by a specialist since working with a pit is much more practical for this type of manipulation. In addition, the turbo happens to be a particularly sensitive element on a Toyota Paseo. You should know that the technique is not really difficult, we still advise you to go to a professional.

  • Change the engine oil and then change your oil filter. Replace a bit of oil, without putting too much. This is an essential manipulation!
  • Remove all the plugs found around the turbo of the Toyota Paseo.
  • Check that there are no desirable non-elements inside the casings, since this is undoubtedly a source of problem.
  • Remove the ducts with all the screws but also the nuts that will support your turbo.
  • Remove the existing turbo from your Toyota Paseo.
  • Install the new turbo, checking that the seals fit perfectly
  • Refit the oil return pipe
  • Install all necessary screws and nuts
  • Fill the turbo with oil from your syringe
  • Operate the turbine by hand to operate the turbo.
  • Connect all of the connections to the turbo of your Toyota Paseo.
  • Once all the components are installed, you can start the engine and let it run for 5 to 10 minutes.

Now that everything is in place but also that the engine has been running for ten minutes, you can walk around behind the wheel of your Toyota Paseo to check that everything is working well. It is also advisable to watch the oil and water level quite often in the coming days. Post a comment in case our tutorial was useful. Enjoy the road!