Now we can find turbos in most automobiles in the last 20 years, whether it's systems essences ou Diesel. Just before starting these manipulations it is obviously necessary to be persuaded that the problem comes from the turbo of the famous Toyota Picnic. But since you are reading this article, you certainly know the source.change-turbo-Toyota-Picnic

How to change the turbo of your Toyota Picnic

Depending on the turbo to be installed, manipulations may vary slightly. As soon as you get a turbo, the product will generally be supplied with a production manual. The best thing to do then is to follow it step by step. But if you have still not made the purchase, you will find below the steps to follow to replace a turbo compressor in this Toyota Picnic. In fact you will know if you have the required skills. Before starting, make sure you have all of the tools required. You will have the utility of your receptacle for engine oil, a bunch of ratchet wrenches, flat pliers, allen keys as well as flat. Often, turbochargers will be supplied with their mounting kit which contains a few jointsFew studs but also a syringe oil. We still advise you to have it checked by a mechanic since working from a pit remains easier for the work. In addition, the turbo turns out to be a particularly fragile constituent on a Toyota Picnic. Even if the handling is not very difficult, we still advise you to go to a garage.

  • Change the engine oil and replace the oil filter. Put a bit of oil, but very little. It is a necessary step!
  • Remove all the plugs around the turbo of the Toyota Picnic.
  • Watch that there are no desirable non-elements within the casings, since this is sometimes a source of concern.
  • Remove the conduits and all the screws and then the nuts which support the turbo.
  • Remove the turbo in place in the Toyota Picnic.
  • Set up the famous turbo, checking that the seals match completely
  • Install the oil return pipe
  • Install all the screws and nuts you removed
  • Fill the turbo with the oil supplied with the turbo
  • Operate the turbine by hand so that the turbo turns.
  • Connect all of the elements to the turbo of your Toyota Picnic.
  • Once all the parts are in place, you can start the engine and run it for 5 to 10 minutes.

Now that everything is in order and that the engine has been running for some time, it is necessary to go for a ride with the Toyota Picnic to check that the assembly works properly. You are also advised to watch the amount of oil and water quite often in the weeks that follow. Post a comment if this text was useful to you. Enjoy again!