Now we can find the turbos in a large part of the vehicles in circulation, whether in systems essences ou Diesel. Just before starting work, we will obviously have to be certain that the problem stems from the turbo of the famous Toyota Pod. However, if you are on this page, it shows that you probably know the source.
How to change the turbo of your Toyota Pod
Depending on the turbo to be presented, the procedures may vary very slightly. When you get a turbocharger it is usually sold with assembly instructions. The best thing to do is so that you read it. But in case you have not yet made the purchase, discover the main axes to be able to replace a turbo compressor on a Toyota Pod. This way you will know if you are capable of it or not. Before you start, make sure you have all of the tools required. You are going to have the use of an oil container, a set of ratchet wrenches, flat pliers, allen and flat wrenches. Usually, these turbochargers turn out to be delivered with their mounting kit which contains a few jointsFew studs as well as a dose oil. However, we advise you to have a professional check it out simply because tinkering from a pit is even more practical for doing these procedures. In addition, the turbocharger happens to be a fairly fragile element on the Toyota Pod. Even if the operation is not frankly complex, it is nevertheless advisable to go to a professional.
- Drain the engine block and replace your oil filter. Add a little oil, but very little. This is an imperative step!
- Remove the various plugs from the Toyota Pod turbocharger.
- Check that there are no desirable non-elements in the casings, since this is undoubtedly a cause of problem.
- Remove the conduits and of course all the screws and then the nuts that will hold your turbocharger.
- Remove the existing turbocharger from the Toyota Pod.
- Install the famous turbocharger, checking that the locations correspond completely
- Install the oil return pipe
- Refit all of the screws and nuts you removed
- Fill the turbocharger with the oil supplied with the turbo
- Start the turbine by hand so as to activate the turbocharger.
- Assemble the different components to the turbocharger of this Toyota Pod.
- Now that when all the parts have been assembled, you can start the engine block and let it run for ten minutes.
Now that the turbo is in place but also that the car has been running for at least 5 minutes, you can walk around in the Toyota Pod so that you can see that everything is working properly. At the same time, we advise you to check the oil and water level fairly frequently in the coming days. Post a comment if this text has ever been useful to you. See you soon !