Now we can find these turbos in a large part of new cars, as much on systems essences ou Diesel. Just before starting these operations, you obviously need to be sure that the problem is with the turbo in your Toyota Previa 2. But since you are reading us, this shows that you probably know the cause.change-turbo-Toyota-Previa-2

How to change the turbo of your Toyota Previa 2

Depending on the turbo to set up, handling may change a bit. When you purchase a turbocharger the product is usually supplied with assembly instructions. The best is therefore to follow it point by point. However in the event that you still have not purchased the product, here are the guidelines for replacing a turbo compressor in the Toyota Previa 2. This way you will understand what capacities are required. Just before starting, you must have all the tools required. You will have the use of a receptacle for the oil, a set of ratchets, a pliers, allen and flat wrenches. Often, turbochargers will be supplied with an assembly kit that includes joints, studs but also a portion oil. It is nevertheless advisable to go to a professional since working with a pit remains even more convenient to do these processes. In addition, the turbocharger turns out to be an extremely sensitive component for a Toyota Previa 2. Even though the operation is not super complicated, we nevertheless advise you to go to a specialist.

  • Change the engine oil then replace your oil filter. Add a sprig of oil, in a small quantity. This is an imperative step!
  • Remove all the plugs that there are around the turbocharger of your Toyota Previa 2.
  • Check that there are no foreign bodies inside the casings, as this is a source of malfunction.
  • Remove the ducts and of course each of the screws and then the nuts that hold your turbocharger.
  • Remove the existing turbocharger from this Toyota Previa 2.
  • Reassemble the famous turbocharger checking that the gaskets match completely
  • Refit the oil return pipe
  • Replace all the screws and nuts you removed
  • Fill the turbocharger with the supplied oil
  • Operate the turbine manually to turn the turbocharger.
  • Reattach all of the components to the turbocharger of this Toyota Previa 2.
  • Once all the parts are assembled, you need to start the engine and run it for a few minutes.

Now that everything is installed and screwed in and the engine has been running for about ten minutes, it is possible to take a tour of the wheel of this Toyota Previa 2 to see that everything is running smoothly. At the same time, we recommend that you check the oil and water level quite frequently in the following weeks. Write a comment if this tutorial was useful to you. Good road !