Now we can find turbos on many cars in circulation, as much on engines essences ou Diesel. Before you start DIY, it is of course necessary to be sure that the problem comes from the turbo of your Toyota Prius 4. However if you are on this page, this shows that you probably know the reason.change-turbo-Toyota-Prius-4

How to change the turbo of your Toyota Prius 4

Depending on the turbo to be presented, processes can change a bit. In case you get a turbo it is usually sold with assembly instructions. The ideal is then that you read it. That said, if you have not yet purchased the product, below you will find the main lines to replace a turbo compressor for your Toyota Prius 4. In fact you will understand what capacities are necessary. Before you start, make sure you have all the tools indispensable. You will use a bucket for oil, a set of ratchet wrenches, your flat pliers, allen and flat wrenches. Often, turbos are delivered with their mounting kit including joints, studs as well as a dose oil. However, we advise you to go to a specialist because working with a pit is even more practical for the procedures. In addition, the turbo happens to be a particularly sensitive element for a Toyota Prius 4. Taking into account that the handling is not particularly laborious, it is still advised to go to a technician.

  • Change the engine block oil and replace the oil filter. Add a small amount of oil. This is an inevitable procedure!
  • Remove all the plugs found around the turbo of this Toyota Prius 4.
  • Check that there are no foreign bodies inside the casings, since this can be a cause for concern.
  • Remove the conduits with all the screws and nuts which hold the turbo.
  • Remove the turbo in place in this Toyota Prius 4.
  • Refit the new turbo, checking that the locations stick precisely
  • Fit the oil return pipe
  • Replace all the necessary screws and nuts
  • Fill the turbo using the oil supplied with the turbo
  • Operate the turbine manually to turn the turbo.
  • Reconnect all the turbo connections of this Toyota Prius 4.
  • Once all the components turn out to be installed, you can start the engine block and let it run for 5 to 10 minutes.

Now that everything is in place and the engine has been running for 5 to 10 minutes, it is possible to take a ride in this Toyota Prius 4 to see that everything is working properly. We also recommend that you check the oil and water level fairly frequently in the weeks that follow. Leave a comment if this tutorial ever helped you. Enjoy again!