Nowadays you can find turbos in much of the vehicles of the last 20 years, whether it's for systems essences ou Diesel. Before starting these manipulations you will obviously have to be sure that the hassle comes from the turbo of your Toyota Proace Verso. However if you have come this far, it means that you certainly know the source.
How to change the turbo of your Toyota Proace Verso
Depending on the turbo to be presented, processes may change very slightly. When you get a turbo it will usually be delivered with an assembly manual. It is best that you read it. But in the event that you have not made the purchase, here are the steps to follow in order to change a turbo on this Toyota Proace Verso. Thereafter you will understand what abilities are needed. Just before you start, make sure you have all of the tools required. You will have the utility of your receptacle for engine oil, a set of ratchet wrenches, your pliers, allen and flat wrenches. Usually the turbos will be supplied with a tool kit including some jointsFew studs and a syringe oil. We still advise you to have it checked by a professional because working from a pit remains much more practical for doing the procedures. In addition, the turbo turns out to be a very delicate component on a Toyota Proace Verso. Taking into account that the operation is not particularly complicated, it is nevertheless advisable to go to a technician.
- Drain the engine block then change your oil filter. Add a little oil, but not too much. This is an inevitable procedure!
- Remove the various plugs found on the turbo of your Toyota Proace Verso.
- Watch that there are no residues in the casings, since that is a source of concern.
- Remove the conduits but also all the screws and then the nuts that will support your turbo.
- Remove the faulty turbo from the Toyota Proace Verso.
- Reassemble the new turbo, checking that the locations are perfectly suitable
- Fit the oil return pipe
- Fit each of the necessary screws and nuts
- Fill the turbo using oil from your syringe
- Rotate the turbine by hand to rotate the turbo.
- Connect the various turbo connections of this Toyota Proace Verso.
- Once each of the components are in place, you will start the engine block and let it run for a few minutes.
Now that everything is in order and that the engine has been running for ten minutes, it is possible to take a ride in the Toyota Proace Verso so as to verify that the assembly is working well. It is advisable at the same time to check the oil and water level quite frequently in the days to come. Leave a comment if our tutorial helped you. Enjoy the road!