Today we can find the turbos on a lot of cars on the market, whether for systems essences ou Diesel. Right before you start these manipulations you will obviously have to be sure that the problem comes from the turbo of your Toyota Rav 4 (3rd Generation). Having said that, since you're reading from us, that means you probably know the cause.
How to change the turbo of your Toyota Rav 4 (3rd Generation)
Depending on the turbo to be installed, manipulations may change slightly. When you get a turbocharger, it will be systematically supplied with a performance note. So the ideal is that you read it. That said, if you have not yet made the purchase, discover the manipulations to do in order to replace a turbo compressor for your Toyota Rav 4 (3rd Generation). This way you will know what abilities are needed. Just before you start, make sure you have all of the tools required. You are going to use your oil container, a set of ratchet wrenches, your flat pliers, your allen and flat wrenches. Most of the time, the turbochargers will be supplied with a tool kit which contains a few jointsFew studs as well as a dose oil. We still advise you to go see a professional because working with a pit is easier for the procedures. And of course, the turbocharger remains a really sensitive element on the Toyota Rav 4 (3rd Generation). You should know that the operation is not very complicated, it is still recommended to go to a garage.
- Drain the engine then replace this oil filter. Replace a small amount of oil. This is an inevitable procedure!
- Remove all the plugs present on the turbocharger of your Toyota Rav 4 (3rd Generation).
- Check that there are no residues inside the casings, because this is sometimes a cause of problem.
- Remove the conduits as well as all the screws and then the nuts which will hold this turbocharger.
- Remove the faulty turbocharger from your Toyota Rav 4 (3rd Generation).
- Reassemble the famous turbocharger, checking that the locations are precisely suitable
- Refit the oil return pipe
- Replace all the necessary screws and nuts
- Fill the turbocharger with the oil supplied with the turbo
- Operate the turbine by hand to operate the turbocharger.
- Re-attach all of the connections to the turbocharger of your Toyota Rav 4 (3rd Generation).
- Now that when all of the parts are found to be assembled, you can start the engine and run it for a few minutes.
Now that everything is in order but also that the car has been running for ten minutes, it is necessary to drive in your Toyota Rav 4 (3rd Generation) to see that the assembly works properly. We also advise you to check the level of oil but also water fairly often for 15 days. Leave a comment if our tutorial was helpful. Good road !