Now we can find these turbos in a lot of new automobiles, whether in engines essences ou Diesel. Before embarking on these manipulations, you must of course be sure that the problem comes from the turbo of this Toyota Rav 4 (4th Generation). However, since you are on this page, it shows that you most likely know the source.
How to change the turbo of your Toyota Rav 4 (4rd Generation)
Compared to the turbo to be set up, the methods can vary a bit. When you purchase a turbocharger, the product will usually be delivered with an assembly note. The ideal is therefore that you follow it to the letter. However, in the event that you have not purchased the product, here are the manipulations to be made to be able to change a turbo compressor in your Toyota Rav 4 (4th Generation). So you will know if you have the required skills. Just before starting, you must have all of the tools required. You will need a bucket for engine oil, a set of ratchet wrenches, flat pliers, your allen and flat wrenches. Very often, these turbos turn out to be delivered with a tool kit including joints, studs but also a dose oil. We still advise you to have a check made by a specialist since working with a pit turns out to be much easier to do this kind of process. What is more, the turbocharger remains a rather delicate component in this Toyota Rav 4 (4th Generation). You should know that the technique is not super complicated, we still advise you to go to a technician.
- Change the engine and change your oil filter. Replace a little oil, but not too much. This is an essential manipulation!
- Remove all the plugs present on the turbocharger of the famous Toyota Rav 4 (4th Generation).
- Check that no undesirable elements are found in the casings, since this can be a cause for concern.
- Remove the ducts and all the screws but also the nuts that will hold your turbocharger.
- Remove the turbocharger in place in this Toyota Rav 4 (4th Generation).
- Reassemble the brand new turbocharger, checking that the seals match exactly
- Install the oil return pipe
- Install the necessary screws and nuts
- Fill the turbocharger with the supplied oil
- Rotate the turbine by hand to activate the turbocharger.
- Connect all the connections to the turbocharger of this Toyota Rav 4 (4th Generation).
- Once the components are installed, you can start the engine and run it for 5 to 10 minutes.
Once the assembly is installed but also that the car has been running for 5 to 10 minutes, it is necessary to walk around behind the wheel of this Toyota Rav 4 (4th Generation) in order to see that the assembly turns well. It is also advisable to watch the amount of oil and water regularly in the coming days. Post a comment in the event that our tutorial has served you. Enjoy again!