Now we can find turbos on many vehicles in the last 20 years, whether it's systems essences ou Diesel. Before you start the work, you must obviously be sure that the problem comes from the turbo of the famous Toyota Rav 4. However, if you read this article, it reveals that you most likely know the reason.change-turbo-Toyota-Rav-4

How to change the turbo of your Toyota Rav 4

Depending on the turbo to install, the methods may vary slightly. In the event that you purchase a turbocharger the product will usually be sold with assembly instructions. The ideal is how you read it. However, in the event that you have not purchased the product, you will find the outline below so as to change a turbo compressor for this Toyota Rav 4. So you will understand if you have the skills. Just before starting, you must have all the tools adequate. You will need your receptacle for the engine oil, a set of ratchets, your flat pliers, your allen wrenches as well as flats. Generally, turbochargers will be supplied with an assembly kit comprising a few jointsFew studs as well as a portion oil. We nevertheless recommend that you go to a specialist because working with a pit turns out to be much more convenient to carry out the manipulations. Furthermore, the turbocharger remains a fairly delicate component on this Toyota Rav 4. Bearing in mind that handling is not particularly complicated, we still advise you to go to a garage.

  • Drain the engine block then change the oil filter. Add a little oil, but not too much. This is an imperative step!
  • Remove the various plugs present around the turbocharger of the Toyota Rav 4.
  • Check that no undesirable elements are found in the casings, since this is undoubtedly a cause of the problem.
  • Remove the pipes but also all the screws but also the nuts which hold the turbocharger.
  • Remove the turbocharger in place in this Toyota Rav 4.
  • Install the new turbocharger, checking that the seals stick precisely
  • Refit the oil return pipe
  • Install each of the necessary screws and nuts
  • Fill the turbocharger using the oil supplied with the turbo
  • Operate the turbine with your hands to operate the turbocharger.
  • Assemble the various connections to the turbocharger of the Toyota Rav 4.
  • Now that when each of the components are installed, you will be able to start the engine block and run it for about ten minutes.

Once everything is set up and screwed in and of course the car has been running for a while, you can ride around in this Toyota Rav 4 to see if everything is working properly. We also recommend that you check the oil and water level regularly in the coming days. Post a comment if this text was useful to you. Enjoy the road!