Now we find the turbos on a lot of new vehicles, whether for systems essences ou Diesel. Just before you start this task, it is of course necessary to be sure that the problem comes from the turbo of your Toyota Starlet. However, since you are on this page, you certainly know the source.
How to change the turbo of your Toyota Starlet
Depending on the turbo to be installed, processes can vary a bit. In the event that you obtain a turbocharger, the product will always be sold together with a performance note. It is best to follow it to the letter. However in case you have not made the purchase, find out how to change a turbo for the Toyota Starlet. So you will understand if you have the required skills. Before starting, be careful to bring all of the tools indispensable. You are going to have the utility of your oil container, a bunch of ratchet wrenches, flat pliers, allen and flat wrenches. Often, turbos will be delivered with a mounting kit including some jointsFew studs as well as a dose oil. We still suggest that you go to a specialist since tinkering with a pit is more convenient to carry out these procedures. In addition, the turbocharger turns out to be a rather delicate component for the Toyota Starlet. You should know that the technique is not particularly difficult, it is nevertheless advisable to go to a professional.
- Drain the engine block and change the oil filter. Add a little oil, but very little. It is an essential phase!
- Remove all the plugs on the turbocharger of the famous Toyota Starlet.
- Check that there are no residues in the casings, since this is sometimes a source of concern.
- Remove the ducts with each of the screws but also the nuts which hold the turbocharger.
- Remove the existing turbocharger from the Toyota Starlet.
- Install the famous turbocharger, checking that the locations stick exactly
- Fit the oil return pipe
- Install all necessary screws and nuts
- Fill the turbocharger with oil from your syringe
- Rotate the turbine by hand so that the turbocharger operates.
- Attach all the components to the turbocharger of this Toyota Starlet.
- Once all the parts are assembled, you will be able to start the engine block and let it run for ten minutes.
Now that everything is in place and the engine has been running for a few minutes, you can walk around in the Toyota Starlet to see that everything is working properly. At the same time, it is advisable to watch the oil and water level regularly for 15 days. Write a comment if this file has ever been useful. Enjoy the road!