Today we find turbos on many automobiles on the market, whether in engines essences ou Diesel. Just before starting the DIY it will obviously have to be certain that the malfunction comes from the turbo of the famous Toyota Tundra. That said, if you're reading to us, it indicates that you probably know the cause.
How to change the turbo of your Toyota Tundra
Compared to the turbo to be positioned, the procedures may fluctuate a bit. As soon as you get a turbo it will always be sold with assembly instructions. The ideal is as you read it. However, if you have still not made the purchase, find out how to replace a turbo compressor for a Toyota Tundra. In this way you will know if you are capable of it or not. Before you start, make sure you have all the tools indispensable. You will need an oil bucket, a bunch of ratchet wrenches, flat pliers, allen and flat wrenches. Generally, turbos will be sold with their tool kit which includes joints, studs as well as a little oil. We still recommend that you have a professional check because working with a pit is even easier to do the procedures. In addition, the turbo proves to be an extremely delicate component on this Toyota Tundra. You should know that the technique is not particularly complicated, we nevertheless advise you to go to a technician.
- Change the engine oil then replace this oil filter. Add a little oil, but not too much. This is an inevitable procedure!
- Remove all the plugs present at the turbo of the Toyota Tundra.
- Check that there are no desirable non-elements inside the housings, since this is undoubtedly a source of malfunction.
- Remove the conduits with all the screws and nuts that will hold this turbo.
- Remove the turbo in place in the Toyota Tundra.
- Set up the famous turbo, checking that the seals match completely
- Refit the oil return pipe
- Refit all the necessary screws and nuts
- Fill the turbo with the supplied oil
- Start the turbine with your hands to activate the turbo.
- Connect all of the elements to the turbo of this Toyota Tundra.
- Once all the components are in place, you need to start the engine and run it for 5 to 10 minutes.
Now that everything is installed and screwed and the car has been running for at least 5 minutes, you have to take a drive behind the wheel of the Toyota Tundra to see that everything is working well. It is advisable at the same time to check the level of oil but also of water quite often for 15 days. Write a comment if ever our tutorial was useful. Good road !