Today we find turbos in most new cars, whether for engines essences ou Diesel. Before embarking on this task, you will naturally have to be convinced that the problem comes from the turbo of the famous Toyota Yaris 2. But given that you have arrived so far, this shows that you probably know the source.change-turbo-Toyota-Yaris-2

How to change the turbo of your Toyota Yaris 2

Depending on the turbo to be presented, the processes may vary a little. As soon as you get a turbocharger it will usually be delivered with a note of achievement. The ideal is then to follow it point by point. However if you have still not made the purchase, we offer an outline for replacing a turbo for a Toyota Yaris 2. This way you will know what capacities are required. Just before you start, make sure you have all of the tools adequate. You will need your oil receptacle, a set of ratchet wrenches, flat pliers, allen and flat wrenches. Very often, turbochargers are found to be supplied with their tool kit comprising joints, studs but also a dose oil. We still advise you to go to a professional since tinkering from a pit is even more convenient for this kind of manipulation. And of course, the turbocharger turns out to be a particularly fragile component in the Toyota Yaris 2. Taking into account that the handling is not super complex, we advise you nevertheless to go to a specialist.

  • Drain the engine then replace the oil filter. Add a small amount of oil. This is an inevitable phase!
  • Remove all the plugs present on the turbocharger of this Toyota Yaris 2.
  • Check that there are no residues inside the casings, since this can be a cause of malfunction.
  • Remove the conduits and of course all the screws and then the nuts which will allow the turbocharger to be held.
  • Remove the faulty turbocharger from the Toyota Yaris 2.
  • Reassemble the famous turbocharger, checking that the seals stick exactly
  • Fit the oil return pipe
  • Replace all the necessary screws and nuts
  • Fill the turbocharger with the supplied oil
  • Start the turbine by hand so that the turbocharger turns.
  • Reconnect all the components to the turbocharger of your Toyota Yaris 2.
  • Once all the parts turn out to be assembled, you can start the engine and let it run for 5 to 10 minutes.

Now that the assembly is installed and the car has been running for about ten minutes, you can drive in the Toyota Yaris 2 to check that the assembly turns properly. We also advise you to watch the amount of oil and water regularly for 15 days. Post a comment if our tutorial was useful to you. Enjoy the road!