Today we can find the turbos in most cars on the market, whether for engines essences ou Diesel. Before starting these operations, you must of course be sure that the problem comes from the turbo in your Toyota Yaris 3. However, since you are on this page, it means that you probably know the source.
How to change the turbo of your Toyota Yaris 3
Depending on the turbo to set up, some of the methods may change slightly. When you buy a turbocharger it will always be sold with an instruction manual. The best thing to do is to follow it point by point. But if you have not made the purchase, find out what to do to change a turbo compressor on this Toyota Yaris 3. So you will understand what capacities are necessary. Before starting, make sure you have all of the tools adequate. You will need a container for engine oil, a bunch of ratchets, a pair of pliers, your allen and flat wrenches. Typically, turbos will be sold with their tool kit which includes joints, studs as well as a little oil. We advise you to go to a pro anyway, since tinkering from a pit remains even easier to carry out this kind of work. In addition, the turbocharger is a fairly delicate component in the Toyota Yaris 3. Even if the operation is not very complex, we still advise you to go to a professional.
- Drain the engine block and change the oil filter. Replace a sprig of oil, but not too much. This is an inevitable phase!
- Remove all the caps that are around the turbocharger of the famous Toyota Yaris 3.
- Check that there are no undesirable elements inside the housings, because this is undoubtedly the source of the problem.
- Remove the pipes and all the screws and nuts that will hold the turbocharger.
- Remove the faulty turbocharger from this Toyota Yaris 3.
- Reassemble the new turbocharger, checking that the locations fully match
- Replace the oil return pipe
- Install the required screws and nuts
- Fill the turbocharger with oil from your syringe
- Rotate the turbine with your hands to operate the turbocharger.
- Connect all the components to the turbocharger of this Toyota Yaris 3.
- Now that when the components are in place, you will be able to start the engine block and let it run for a few minutes.
Once the assembly is installed but also the engine has been running for a few minutes, you can take a ride in this Toyota Yaris 3 to see that everything is working properly. It is also advisable to check the oil and water level quite often for 15 days. Write a comment if this tutorial was useful. Good road !