Now we can find the turbos in a lot of new cars, whether in systems essences ou Diesel. Before starting this task it is necessary to naturally be convinced that the hassle comes from the turbo of the famous Volkswagen Iltis. But if you've gotten this far, it means you likely know the source.
How to change the turbo on your Volkswagen Iltis
Compared to the turbo to be installed, processes will be able to fluctuate very slightly. In case you buy a turbo this usually comes with an assembly note. It is best to follow it point by point. That said, if you have not yet purchased the product, here are the steps to replace a turbo on a Volkswagen Iltis. So you will know if you have the required skills. Before you start, make sure you have all of the tools adequate. You will need your bucket for engine oil, a set of ratchet wrenches, your pliers, allen wrenches as well as wrenches. Usually these turbochargers will be delivered with their lot of utensils which includes joints, studs as well as a portion oil. However, we advise you to have it checked by a mechanic because working with a pit turns out to be easier to carry out these manipulations. In addition, the turbo is a very delicate component on a Volkswagen Iltis. Taking into account that the technique is not very complicated, we still advise you to go to a specialist.
- Drain the engine block then replace your oil filter. Replace a little oil, but very little. It is a necessary phase!
- Remove all the plugs that there are on the turbo of your Volkswagen Iltis.
- Check that there are no desirable non-elements in the casings, since this is undoubtedly a source of problem.
- Remove the conduits as well as each of the screws but also the nuts which allow to hold your turbo.
- Remove the turbo in place in this Volkswagen Iltis.
- Install the famous turbo, checking that the locations correspond completely
- Install the oil return pipe
- Install the necessary screws and nuts
- Fill the turbo with the oil supplied with the turbo
- Rotate the turbine with your hands to rotate the turbo.
- Reconnect all the turbo connections of the Volkswagen Iltis.
- As soon as the parts are installed, you can start the engine block and operate it for 5 to 10 minutes.
Now that everything is in place and of course that the engine has been running for at least 5 minutes, it is necessary to take a ride in this Volkswagen Iltis in order to verify that the assembly works properly. It is advisable at the same time to check the level of oil but also water regularly in the weeks that follow. Write a comment if our file has ever been useful. Good road !