Nowadays there are turbos on a lot of cars in circulation, as many on systems essences ou Diesel. Before starting these manipulations you will of course have to be convinced that the hassle arises from the turbo of this Volkswagen Jetta. However, since you are reading from us, this means that you probably know the source.
How to change the turbo on your Volkswagen Jetta
Depending on the turbo to install, procedures may change slightly. When you get a turbo it will always come with an assembly note. It is best that you follow it to the letter. On the other hand if you have not yet made the purchase, here are the manipulations to do in order to replace a turbo compressor on this Volkswagen Jetta. In fact you will know what capabilities are needed. Before you start, make sure you have all the tools adequate. You are going to need an oil container, a bunch of ratchet wrenches, flat pliers, allen and flat wrenches. Often these turbochargers will come with a tool kit that includes a few jointsFew studs and a portion oil. However, we advise you to go to a mechanic because working from a pit turns out to be more practical for the work. In addition, the turbo proves to be a fairly delicate element on a Volkswagen Jetta. You should know that the technique is not extremely laborious, we advise you to go to a specialist.
- Change the engine block oil and replace your oil filter. Put a bit of oil back, but not too much. This is an inevitable step!
- Remove all the plugs found at the turbo of this Volkswagen Jetta.
- Watch that there are no desirable non-elements in the casings, because that is undoubtedly a source of problem.
- Remove the conduits with all the screws and nuts which support your turbo.
- Remove the faulty turbo from the Volkswagen Jetta.
- Set up the brand new turbo, checking that the seals match exactly
- Replace the oil return pipe
- Fit all necessary screws and nuts
- Fill the turbo with oil from your syringe
- Manually rotate the turbine to activate the turbo.
- Assemble all the components in the turbo of your Volkswagen Jetta.
- Once all the parts turn out to be assembled, you will start the engine block and operate it for ten minutes.
Now that everything is in order but also that the engine has been running for a few minutes, it is possible to walk around with the Volkswagen Jetta in order to check that everything is working properly. It is also advisable to check the oil level but also the water level quite often for 15 days. Write a comment in case our guide was useful to you. Good walk !