Before you start, you will need to know various indications about pilot lights, the technical term of which is low beam. Unlike some lights, they are mandatory. They must be a minimum of two and operate on the left and on the right. They must also illuminate at 30 meters without dazzling the motorists opposite. If one of the lights on the Citroen Osmose is broken, you risk a fine of 68 euros. Of course, it is first and foremost for safety reasons that it is essential to change them when they no longer work. Let's see now how to change these low beam headlights on the Citroen Osmose, point by point.change-light-low-beam-Citroen-Osmose

How to change a night light on a Citroen Osmose

Before starting operations, it is necessary to turn off the engine. Allow approximately 5 or 10 minutes for this change of low beam for a Citroen Osmose. This manipulation does not require any special tool, except a flat screwdriver to help you if a cover is difficult to come.

  • Open the hood of the Citroen Osmose
  • Identify the location of the headlight unit
  • Remove the protective cover in order to reach the fire block
  • Disconnect the connector
  • Gently remove the bulb from the low beam
  • Compare the new bulb with the old one to be sure it fits completely
  • Place the new bulb gently in its location. Watch that it is fixed and correctly engaged
  • Put the connector back in its place, but also the cover

That's it. Changing a low beam on a Citroen Osmose is an extremely simple and short operation, accessible to any level in the field. See you soon!