First of all, you need to know some information about the pilot lights, whose technical term is low beam. Unlike some lights, these are mandatory. They must be at least two and walk left and right. They must also light at a distance of 30 meters without dazzling the conductors opposite. In the event that one of the lights of the Citroen Saxo Vts is broken, you risk a ticket of 68 euros. Naturally, it is to start with safety reasons that it is necessary to replace them when they no longer work. Now let's see how to replace these low beams on the Citroen Saxo Vts, step by step.change-light-low-beam-Citroen-Saxo-Vts

How to change a night light on a Citroen Saxo Vts

Before starting operations, it is essential to switch off the engine. Allow about 5 or 10 minutes for this change of low beam on the Citroen Saxo Vts. This operation does not require a specific tool, except perhaps a flat screwdriver to help you if a cover is difficult to remove.

  • Open the hood of the Citroen Saxo Vts
  • Locate the location of the headlight unit
  • Remove the protective cover so as to reach the fire block
  • Disconnect the connector
  • Carefully remove the bulb from the low beam
  • Compare the new bulb with the old one to be sure it fits perfectly
  • Carefully put the new bulb in its place. Make sure it is fixed and properly engaged
  • Replace the connector in its place, as well as the cover

It is done. Changing a low beam on the Citroen Saxo Vts is an extremely simple and short operation, accessible to any level in the field. Good road!