Before you start, you need to know some information about the pilot lights, whose technical term is low beam. Unlike some lights, they are mandatory. They must be at least two and work on the left as on the right. They must also light at a distance of 30 meters without blindding the conductors opposite. If one of the lights of the Citroen Tubik does not work, you risk a fine of 68 euros. Of course, it is first of all for safety reasons that it is essential to change them when they no longer work. We will now see how to change these low beams on the Citroen Tubik, step by step.
How to change a night light on a Citroen Tubik
Before starting operations, it is essential to stop the engine. Allow approximately 5 or 10 minutes for this change of low beam on a Citroen Tubik. This manipulation does not require a specific tool, except perhaps a flat screwdriver to help you if a cover is difficult to remove.
- Open the hood of the Citroen Tubik
- Locate the location of the headlight unit
- Remove the protective cover so as to reach the light unit
- Disconnect the connector
- Gently remove the bulb from the low beam
- Compare the new bulb with the old one to be sure it completely matches
- Carefully put the new bulb in its place. Make sure that it is fixed and correctly engaged
- Put the connector back in its place, but also the cover
It is done. Changing a low beam on a Citroen Tubik is a very easy and quick repair, accessible at any level in the field. Good road!