First of all, you must understand several indications on the pilot lights, whose technical term is low beam. Unlike some lights, these are mandatory. They must be at least two and walk left and right. They must also light up at 30 meters without blinding the conductors opposite. If one of the lights of your hyundai matrix is not functional, you risk a ticket of 68 euros. Of course, it is initially for safety reasons that it is essential to replace them when they no longer work. Now let's see how to replace these dipped beam headlights on the hyundai matrix, point by point.
How to Change a Night Light on a Hyundai Matrix
Before starting operations, it is essential to stop the engine. Allow about 5 or 10 minutes for this replacement low beam on a hyundai matrix. This manipulation does not require any special tool, except a flat screwdriver to help you if a cover is difficult to remove.
- Open the hood of the Hyundai matrix
- Identify the location of the headlight unit
- Remove the protective cover in order to reach the light unit
- Disconnect the connector
- Carefully remove the bulb from the low beam
- Compare the new bulb with the previous one to be sure it fits completely
- Carefully place the new bulb in its location. Make sure it is stable and properly engaged
- Replace the connector, but also the cover
It is done. Replacing a low beam on a hyundai matrix is a very simple and short operation, accessible at any level in the field. Be careful!