Before you start, you should know several indications about pilot lights, the technical term of which is low beam. Unlike some lights, these are mandatory. They must be a minimum of two and operate on the left and on the right. They must also illuminate at 30 meters without dazzling the users opposite. If one of the lights on your Hyundai Scoupe is not functional, you risk a fine of 68 euros. Obviously, it is to begin with for reasons of safety that it is essential to replace them when they no longer work. We will now see how to replace these low beams on the Hyundai Scoupe, point by point.change-crossover-Hyundai-Scoupe

How to change a pilot light on a Hyundai Scoupe

Before starting operations, it is necessary to switch off the engine. Allow about 5 or 10 minutes for this low beam replacement for a Hyundai Scoupe. This operation does not require any special tool, except perhaps a flat screwdriver to help you if a cover is struggling to remove.

  • Opening the hood of the Hyundai Scoupe
  • Locate the location of the headlight unit
  • Remove the protective cover so as to reach the light unit
  • Disconnect the connector
  • Gently remove the bulb from the low beam
  • Compare the new bulb with the old one to be sure it fits completely
  • Gently put the new bulb in its place. Watch that it is stable and well engaged
  • Replace the connector, but also the cover

It is done. Changing a low beam on a Hyundai Scoupe is a very simple and short operation, accessible to beginners. Be careful!