Before you start, you should know some information about the pilot lights, whose technical term is low beam. Unlike some lights, these are essential. They must be at least two and operate on the left and on the right. They must also light up to 30 meters without dazzling the conductors opposite. If one of the lights of your Hyundai Xg is not functional, you risk a fine of 68 euros. Naturally, it is primarily for safety reasons that it is essential to change them when they no longer work. We will now see how to change these low beams on the Hyundai Xg, step by step.
How to change a night light on a Hyundai Xg
Before starting operations, it is necessary to stop the engine. Allow approximately 5 or 10 minutes for this change of low beam on a Hyundai Xg. This manipulation does not require a specific tool, except a flat screwdriver to help you if a cover is difficult to remove.
- Open the hood of the Hyundai Xg
- Identify the location of the lighthouse block
- Remove the protective cover so as to reach the light unit
- Disconnect the connector
- Carefully remove the bulb from the low beam
- Compare the new bulb with the previous one to be sure it fits completely
- Carefully put the new bulb in its place. Make sure that it is fixed and correctly engaged
- Put the connector in its place, but also the cover
That's it. Changing a low beam on a Hyundai Xg is an extremely easy and quick repair, accessible at any level in the field. Enjoy the road!