First of all, you need to know several information about the pilot lights, whose technical term is low beam. Unlike some lights, these are essential. They must be at least two and walk left and right. They must also light at a distance of 30 meters without dazzling motorists in front. If one of the lights of the Iveco Massif does not work, you risk a ticket of 68 euros. Obviously, it is primarily for safety reasons that it is necessary to replace them when they no longer work. We will now see how to replace these low beams on the Iveco Massif, step by step.
How to change a night light on an Iveco Massif
Before starting operations, it is necessary to switch off the engine. Allow about 5 or 10 minutes for this change of low beam for the Iveco Massif. This repair does not require a specific tool, except maybe a flat screwdriver to help you if a cover is hard to come by.
- Open the hood of the Iveco Massif
- Locate the location of the headlight unit
- Remove the protective cover so as to gain access to the light unit
- Disconnect the connector
- Gently remove the bulb from the low beam
- Compare the new bulb with the old one to be sure it is totally suitable
- Gently place the new bulb in its location. Make sure it is stable and correctly engaged
- Put the connector back in its place, but also the cover
It is done. Changing a low beam on the Iveco Massif is an extremely simple and short operation, accessible to beginners. Good walk!