Before getting started, you need to know some information about the pilot lights, whose technical term is low beam. Unlike some lights, these are mandatory. They must be at least two and walk left and right. They must also light up to 30 meters without blinding the conductors opposite. Assumed that one of the lights of the Iveco Minivan is not functional, you risk a fine of 68 euros. Obviously, it is to start with safety reasons that it is necessary to replace them when they no longer work. Now let's see how to replace these low beams on the Iveco Minivan, step by step.change-light-low-beam-Iveco-Minivan

How to change a night light on an Iveco Minivan

Before starting the manipulations, it is necessary to switch off the engine. Allow about 5 or 10 minutes for this change of low beam for the Iveco Minivan. This operation does not require any special tool, except perhaps a flat screwdriver to help you if a cover is difficult to remove.

  • Open the hood of the Iveco Minivan
  • Identify the location of the headlight unit
  • Remove the protective cover in order to reach the fire block
  • Disconnect the connector
  • Gently remove the bulb from the low beam
  • Compare the new bulb with the previous one to be sure it fits perfectly
  • Carefully put the new bulb in its place. Check that it is fixed and properly engaged
  • Replace the connector in its place, as well as the cover

That's it. Replacing a low beam on the Iveco Minivan is an extremely easy and short operation, accessible to beginners. Good road!