First of all, you will need to know several indications on the pilot lights, whose technical term is low beam. Unlike some lights, these are mandatory. They must be at least two and operate on the left and on the right. They must also light at a distance of 30 meters without blinding the conductors opposite. If one of the lights of your jeep cherokee does not work, you risk a ticket of 68 euros. Naturally, it is primarily for safety reasons that it is essential to replace them when they no longer work. We will now see how to replace these low beams on the jeep cherokee, step by step.change-light-crossover-jeep-cherokee

How to Change a Night Light on a Cherokee Jeep

Before starting the manipulations, it is necessary to switch off the engine. Allow about 5 or 10 minutes for this replacement low beam for a jeep cherokee. This repair does not require a specific tool, except a flat screwdriver to help you if a cover has trouble coming.

  • Open the hood of the jeep cherokee
  • Identify the location of the lighthouse block
  • Remove the protective cover so as to reach the light unit
  • Disconnect the connector
  • Carefully remove the bulb from the low beam
  • Compare the new bulb with the old one to be sure it is totally suitable
  • Gently put the new bulb in its place. Watch that it is stable and well engaged
  • Replace the connector in its place, as well as the cover

That's it. Changing a low beam on a Cherokee jeep is a very simple and fast operation, accessible to any level in the field. Enjoy the road!