First and foremost, you will need to understand a lot of information about sidelights, the technical term for which is low beam. Unlike some lights, these are essential. They must be at least two and operate on the left as well as on the right. They must also illuminate at a distance of 30 meters without blinding the users opposite. Supposing that one of the lights on the Jeep Comanche is not functional, you risk a fine of 68 euros. Of course, it is to begin with for safety reasons that it is essential to replace them when they no longer work. Now let's see how to replace these low beam headlights on the Jeep Comanche, step by step.
How to change a night light on a Jeep Comanche
Before starting operations, it is essential to switch off the engine. Allow approximately 5 or 10 minutes for this low beam replacement for the Jeep Comanche. This operation does not require any specific tool, except perhaps a flat screwdriver to help you if a cover has trouble coming.
- Open the hood of the Jeep Comanche
- Identify the location of the headlight unit
- Remove the protective cover so as to reach the light unit
- Disconnect the connector
- Carefully remove the bulb from the low beam
- Compare the new bulb with the old one to be sure it fits perfectly
- Carefully put the new bulb in its place. Watch it is fixed and well engaged
- Replace the connector and the cover
It's OK. Replacing a low beam on the Jeep Comanche is an extremely quick and easy operation, accessible to any level in the field. Enjoy the road!