First of all, you need to know several information about the pilot lights, also called dipped beam. Unlike some lights, these are mandatory. They must be at least two and work on the left as on the right. They must also light up at a distance of 30 meters without blinding the users opposite. If one of the lights of the Jeep Ford is not functional, you risk a ticket of 68 euros. Naturally, it is to start with safety reasons that it is essential to change them when they no longer work. We will now see how to change these low beams on the Ford Jeep, step by step.change-light-low-beam-Jeep-Ford

How to Change a Night Light on a Ford Jeep

Before starting operations, it is necessary to stop the engine. Allow approximately 5 or 10 minutes for this change of low beam for a Ford Jeep. This repair does not require any special tool, except maybe a flat screwdriver to help you if a cover is difficult to come.

  • Open the hood of the Jeep Ford
  • Identify the location of the headlight unit
  • Remove the protective cover so as to gain access to the light unit
  • Disconnect the connector
  • Gently remove the bulb from the low beam
  • Compare the new bulb with the old one to be sure that it fits completely
  • Carefully place the new bulb in its location. Make sure it is fixed and properly engaged
  • Replace the connector and the cover

That's it. Replacing a low beam on a Ford Jeep is an extremely easy and quick repair, accessible at any level in the field. Be careful!