Before you start, you need to understand some information about the pilot lights, also called low beam. Unlike some lights, these are mandatory. They must be at least two and walk left and right. They must also light at a distance of 30 meters without blinding motorists opposite. If one of the lights on your Jeep Renegade is broken, you risk a fine of 68 euros. Obviously, it is initially for safety reasons that it is essential to replace them when they no longer work. Now let's see how to replace these low beams on the Jeep Renegade, point by point.
How to Change a Night Light on a Jeep Renegade
Before starting operations, it is necessary to switch off the engine. Allow about 5 or 10 minutes for this replacement low beam for the Jeep Renegade. This repair does not require a specific tool, except a flat screwdriver to help you if a cover is difficult to come.
- Open the hood of the Jeep Renegade
- Identify the location of the lighthouse block
- Remove the protective cover so as to reach the light unit
- Disconnect the connector
- Carefully remove the bulb from the low beam
- Compare the new bulb with the previous one to make sure it fits perfectly
- Carefully place the new bulb in its location. Watch it is fixed and well engaged
- Put the connector in its place, but also the cover
Its good. Changing a low beam on the Jeep Renegade is a very simple and fast operation, accessible to any level in the field. See you soon!