Before you start, you need to know some information about the pilot lights, the technical term of which is low beam. Unlike some lights, these are essential. They must be at least two and operate on the left and on the right. They must also light up to 30 meters without blinding the users opposite. If one of the lights of the Kia Pride Kombi does not work, you risk a ticket of 68 euros. Naturally, it is above all for safety reasons that it is essential to change them when they no longer work. We will now see how to change these low beams on the Kia Pride Kombi, point by point.change-light-low-beam-Kia-Pride-Kombi

How to change a night light on a Kia Pride Kombi

Before starting the manipulations, it is essential to stop the engine. Allow about 5 or 10 minutes for this replacement low beam on the Kia Pride Kombi. This operation does not require a specific tool, except a flat screwdriver to help you if a cover is difficult to come.

  • Open the hood of the Kia Pride Kombi
  • Identify the location of the headlight unit
  • Remove the protective cover in order to access the fire block
  • Disconnect the connector
  • Gently remove the bulb from the low beam
  • Compare the new bulb with the old one to be sure it fits completely
  • Carefully place the new bulb in its location. Watch that it is fixed and correctly engaged
  • Put the connector back in its place, but also the cover

It's OK. Replacing a low beam on the Kia Pride Kombi is an extremely easy and short operation, accessible to any level in the field. Good road!