First of all, you need to know some information about the pilot lights, whose technical term is low beam. Unlike some lights, they are essential. They must be at least two and work on the left as on the right. They must also light up at a distance of 30 meters without blinding the users opposite. If one of the Kia Pride lights does not work, you risk a ticket of 68 euros. Obviously, it is above all for security reasons that it is necessary to change them when they no longer work. We will now see how to change these low beams on the Kia Pride, step by step.
How to change a night light on a Kia Pride
Before starting the manipulations, it is necessary to switch off the engine. Allow approximately 5 or 10 minutes for this replacement low beam on a Kia Pride. This repair does not require a specific tool, except a flat screwdriver to help you if a cover has trouble removing.
- Open the hood of the Kia Pride
- Identify the location of the headlight unit
- Remove the protective cover so as to gain access to the light unit
- Disconnect the connector
- Gently remove the bulb from the low beam
- Compare the new bulb with the previous one to make sure it fits perfectly
- Carefully place the new bulb in its location. Check that it is stable and well engaged
- Replace the connector, but also the cover
It is done. Changing a low beam on a Kia Pride is an extremely easy and fast operation, accessible to any level in the field. Enjoy the road!