Before you start, you need to know some information about the pilot lights, the technical term of which is low beam. Unlike some lights, these are mandatory. They must be at least two and work on the left as on the right. They must also light up to 30 meters without blinding the users opposite. If one of the lights of the Kia Rio 3 does not work, you risk a fine of 68 euros. Of course, it is primarily for safety reasons that it is essential to replace them when they no longer work. Now let's see how to replace these low beams on the Kia Rio 3, point by point.change-light-low-beam-Kia-Rio-3

How to change a night light on a Kia Rio 3

Before starting operations, it is essential to switch off the engine. Allow about 5 or 10 minutes for this replacement low beam for a Kia Rio 3. This repair does not require a specific tool, except a flat screwdriver to help you if a cover is difficult to remove .

  • Open the hood of the Kia Rio 3
  • Identify the location of the headlight unit
  • Remove the protective cover in order to reach the fire block
  • Disconnect the connector
  • Carefully remove the bulb from the low beam
  • Compare the new bulb with the old one to be sure it fits completely
  • Place the new bulb gently in its location. Make sure it is stable and correctly engaged
  • Put the connector in its place, but also the cover

That's it. Replacing a low beam on a Kia Rio 3 is an extremely simple and fast operation, accessible to any level in the field. Good walk!