First of all, you will need to know some information about the pilot lights, also called dipped beam. Unlike some lights, these are mandatory. They must be at least two and walk left and right. They must also light at a distance of 30 meters without dazzling the conductors opposite. If one of the Kiaage lights is not functional, you risk a fine of 68 euros. Obviously, it is initially for safety reasons that it is necessary to change them when they no longer work. Now let's see how to change these low beams on the Kiaage, point by point.change-light-low-beam-Kiaage

How to Change a Night Light on a Kiaage

Before starting operations, it is necessary to stop the engine. Allow approximately 5 or 10 minutes for this change of low beam on a Kiaage. This operation does not require any special tool, except a flat screwdriver to help you if a cover is difficult to remove.

  • Open the hood of the Kiaage
  • Identify the location of the headlight unit
  • Remove the protective cover so as to reach the fire block
  • Disconnect the connector
  • Gently remove the bulb from the low beam
  • Compare the new bulb with the old one to be sure it fits perfectly
  • Gently put the new bulb in its place. Watch that it is stable and correctly engaged
  • Put the connector back in its place, but also the cover

It's OK. Replacing a low beam on a Kiaage is an extremely simple and short repair, accessible at any level in the field. Good road!