Before you start, you should know some indications about the pilot lights, the technical term of which is dipped beam. Unlike some lights, these are mandatory. They must be at least two and walk left and right. They must also illuminate at a distance of 30 meters without dazzling the conductors opposite. If one of the lights of the Renault Kangoo 2 does not work, you risk a fine of 68 euros. Of course, it is primarily for safety reasons that it is essential to replace them when they no longer work. Now let's see how to replace these low beam headlights on the Renault Kangoo 2, point by point.change-low-beam-Renault-Kangoo-2

How to change a night light on a Renault Kangoo 2

Before starting operations, it is necessary to switch off the engine. Allow approximately 5 or 10 minutes for this change of low beam for a Renault Kangoo 2. This operation does not require any specific tool, except perhaps a flat screwdriver to help you if a cover has difficulty removing.

  • Open the hood of the Renault Kangoo 2
  • Identify the location of the headlight unit
  • Remove the protective cover in order to access the light unit
  • Disconnect the connector
  • Gently remove the bulb from the low beam
  • Compare the new bulb with the old one to be sure it completely matches
  • Gently place the new bulb in its location. Check that it is stable and well engaged
  • Replace the connector in its place, as well as the cover

It is done. Changing a low beam on a Renault Kangoo 2 is a very simple and fast repair, accessible to all levels in the field. Good road!