Before you start, you need to know several indications about the pilot lights, whose technical term is low beam. Unlike some lights, these are mandatory. They must be at least two and work on the left as on the right. They must also light at a distance of 30 meters without blinding motorists vis-à-vis. If one of the seat exeo lights is broken, you will be fined 68 euros. Naturally, it is above all for safety reasons that it is essential to replace them when they no longer work. Now let's see how to replace these low beams on the seat exeo, step by step.change-light-dipped-seat-exeo

How to change a pilot on a seat exeo

Before starting the manipulations, it is essential to stop the engine. Allow approximately 5 or 10 minutes for this change of low beam for the seat exeo. This manipulation does not require any special tool, except a flat screwdriver to help you if a cover is difficult to come.

  • Open the hood of the seat exeo
  • Identify the location of the headlight unit
  • Remove the protective cover in order to reach the fire block
  • Disconnect the connector
  • Gently remove the bulb from the low beam
  • Compare the new bulb with the previous one to be sure it is totally suitable
  • Carefully place the new bulb in its location. Watch that it is stable and correctly engaged
  • Put the connector in its place, but also the cover

It's OK. Replacing a low beam on the seat exeo is an extremely easy and quick repair, accessible at any level in the field. Enjoy the road!