Before you begin, you should know some information about the pilot lights, also called low beam. Unlike some lights, these are essential. They must be at least two and walk left and right. They must also light up at 30 meters without blinding the conductors opposite. If one of the lights of your Seat Ginebra does not work, you risk a fine of 68 euros. Of course, it is first of all for safety reasons that it is necessary to change them when they no longer work. Now let's see how to change these low beam on the Seat Ginebra, step by step.
How to change a night light on a Seat Ginebra
Before starting the manipulations, it is essential to switch off the engine. Allow about 5 or 10 minutes for this change of low beam on a Seat Ginebra. This manipulation does not require any special tool, except a flat screwdriver to help you if a cover is hard to come by.
- Open the hood of the Seat Ginebra
- Identify the location of the headlight unit
- Remove the protective cover in order to reach the fire block
- Disconnect the connector
- Gently remove the bulb from the low beam
- Compare the new bulb with the old one to be sure it is totally suitable
- Carefully put the new bulb in its place. Check that it is stable and well engaged
- Replace the connector, but also the cover
That's it. Changing a low beam on a Seat Ginebra is a very easy and short repair, accessible at any level in the field. Good road!