Before you start, you need to understand several things about the pilot lights, also known as low beam. Unlike some lights, these are essential. They must be at least two and operate on the left and on the right. They must also light up to 30 meters without dazzling the conductors opposite. In the event that one of the Seat Ronda lights does not work, you risk a fine of 68 euros. Of course, it is first of all for safety reasons that it is essential to replace them when they no longer work. We will now see how to replace these low beams on the Seat Ronda, point by point.
How to change a pilot on a Seat Ronda
Before starting operations, it is essential to stop the engine. Allow approximately 5 or 10 minutes for this change of low beam on the Seat Ronda. This repair does not require a specific tool, except maybe a flat screwdriver to help you if a cover is hard to come by.
- Open the hood of the Seat Ronda
- Identify the location of the headlight unit
- Remove the protective cover in order to reach the light unit
- Disconnect the connector
- Carefully remove the bulb from the low beam
- Compare the new bulb with the previous one to make sure it fits perfectly
- Carefully put the new bulb in its place. Check that it is stable and well engaged
- Replace the connector, but also the cover
That's it. Replacing a low beam on the Seat Ronda is an extremely easy and short repair, accessible at any level in the field. Be careful!