Before you start, you need to know several pieces of information about the pilot lights, also called dipped beam. Unlike some lights, these are mandatory. They must be at least two and work on the left as on the right. They must also light at a distance of 30 meters without dazzling the users opposite. If one of the lights on your Smart For-us is not functional, you will be fined 68 euros. Of course, it is first of all for safety reasons that it is essential to change them when they no longer work. Now let's see how to change these low beams on the Smart For-us, point by point.change-light-low-beam-Smart-For-us

How to change a night light on a Smart For-us

Before starting the manipulations, it is essential to switch off the engine. Allow approximately 5 or 10 minutes for this change of low beam on a Smart For-us. This repair does not require a specific tool, except maybe a flat screwdriver to help you if a cover is hard to come by.

  • Open the cover of the Smart For-us
  • Identify the location of the lighthouse block
  • Remove the protective cover so as to reach the light unit
  • Disconnect the connector
  • Carefully remove the bulb from the low beam
  • Compare the new bulb with the previous one to be sure it fits completely
  • Gently place the new bulb in its location. Watch it is fixed and well engaged
  • Replace the connector, but also the cover

That's it. Replacing a low beam on a Smart For-us is an extremely simple and fast operation, accessible at any level in the field. Enjoy the road!