Before you start, you need to know some information about the pilot lights, whose technical term is low beam. Unlike some lights, these are essential. They must be at least two and operate on the left and on the right. They must also light at a distance of 30 meters without dazzling motorists vis-à-vis. If one of the lights on the Smart Forvision is broken, you risk a fine of 68 euros. Obviously, it is above all for safety reasons that it is essential to change them when they no longer work. We will now see how to change these low beams on the Smart Forvision, step by step.change-light-low-beam-Smart-Forvision

How to change a night light on a Smart Forvision

Before starting operations, it is necessary to switch off the engine. Allow about 5 or 10 minutes for this replacement low beam for a Smart Forvision. This operation does not require any special tool, except a flat screwdriver to help you if a cover is difficult to come.

  • Open the cover of the Smart Forvision
  • Identify the location of the headlight unit
  • Remove the protective cover in order to reach the fire block
  • Disconnect the connector
  • Carefully remove the bulb from the low beam
  • Compare the new bulb with the old one to be sure it fits perfectly
  • Place the new bulb gently in its location. Check that it is stable and well engaged
  • Replace the connector in its place, as well as the cover

It's OK. Replacing a low beam on a Smart Forvision is a very easy and quick repair, accessible to beginners. Good road!