First of all, you will have to know several indications about the pilot lights, the technical term of which is dipped beam. Unlike some lights, they are essential. They must be at least two and work left and right. They must also illuminate at a distance of 30 meters without dazzling the users opposite. Suppose one of the smart roadster's lights doesn't work, you risk a fine of 68 euros. Of course, it is above all for safety reasons that it is necessary to change them when they no longer work. We will now see how to change these low beams on the smart roadster, point by point.
How to change a night light on a smart roadster
Before starting operations, it is essential to switch off the engine. Allow about 5 or 10 minutes for this low beam replacement for a smart roadster. This manipulation does not require any special tool, except perhaps a flat screwdriver to help you if a cover has difficulty removing.
- Open the hood of the smart roadster
- Locate the location of the headlight unit
- Remove the protective cover in order to access the fire block
- Disconnect the connector
- Gently remove the bulb from the low beam
- Compare the new bulb with the old one to be sure it fits perfectly
- Carefully place the new bulb in its location. Make sure that it is fixed and correctly engaged
- Put the connector back in its place, but also the cover
Its good. Replacing a low beam on a smart roadster is a very easy and short operation, accessible to beginners. Be careful!