Before you start, you should know some indications about the pilot lights, also called dipped beam headlamps. Unlike some lights, they are mandatory. They must be a minimum of two and operate on the left and on the right. They must also illuminate at 30 meters without blinding the users in front. If one of the lights on the smart smart is broken, you risk a fine of 68 euros. Of course, it is initially for safety reasons that it is necessary to replace them when they no longer work. We will now see how to replace these low beams on the smart smart, point by point.change-crossing-light-smart-smart

How to change a night light on a smart smart

Before starting the manipulations, it is necessary to turn off the engine. Allow about 5 or 10 minutes for this change of low beam on a smart smart. This repair does not require any special tool, except perhaps a flat screwdriver to help you if a cover is difficult to remove.

  • Open the hood of the smart smart
  • Identify the location of the lighthouse block
  • Remove the protective cover in order to reach the fire block
  • Disconnect the connector
  • Carefully remove the bulb from the low beam
  • Compare the new bulb with the previous one to make sure it fits completely
  • Carefully place the new bulb in its location. Make sure that it is fixed and correctly engaged
  • Replace the connector, but also the cover

That's it. Changing a low beam on a smart smart is a very simple and short operation, accessible to all levels in the field. Enjoy the road!